Home » The Journal » How to Clean Your Shower Head That Is Clogged?

How to Clean Your Shower Head That Is Clogged?

Are you tired of your shower head getting blocked every few days? Have you tried several DIY solutions and still did not manage to get it fixed properly? You can unclog your clogged shower head very easily after reading this article.

In this article, we will give you the most foolproof solution to the question; how to clean your shower head that is clogged?

Clogged Shower Head

Why a Shower head gets Clogged?

The blockage in your shower head is not that uncommon. You have to understand that it is constantly spewing out water whenever you take a bath. Due to the natural presence of minerals like calcium in the water, the head can get clogged up over time.

Clogged Shower Head

This issue is not only limited to shower heads, either. You can find the same problem in your shower faucets or any other water sprouting sources. All it does is that it slows down the flow of water. It can get quite annoying, but you can live with that if you choose not to fix it.

Almost all shower heads will face this problem eventually. And it is not that harmful if you know how to deal with it. There are endless solutions online about how to deal with the clogging issue, but not all of them are equally effective.

And if you are really unlucky, the fixes might end up doing more harm than good. So, to take care of the problem the right way, we give you two time-tested solutions that are proven to get rid of it.

So, how to clean your shower head that is clogged? Today we are going to share two best ways to clean a shower head for you. The first method involves using vinegar. Since it is an acidic material, it helps break down the rust and get the water flowing well as new.

Using White Vinegar to Get Rid of A Clogged Shower head

Using white vinegar to clean shower head blockage is a solution that has been in use for ages. The steps are pretty simple. All you need it a zippered bag, an elastic band, and white vinegar.

Lucy's Family Owned - Natural Distilled...
  • Cleaning - Yes! White Vinegar for cleaning works fantastically.
  • Cooking - Spices up dipping sauces, develops flavor, makes homemade bread...
  • Family Owned & Family Run - Here at Lucy's, we seek to achieve one purpose:...

First, you take your bag and fill it about halfway with vinegar. Using the elastic band fasten the bag tightly around the shower head. Make sure that the head is fully immersed in the vinegar. The best way to go is by taking the shower head off instead of putting the bag on while it is mounted.

The vinegar needs to make proper contact with the rust for this method to work correctly. It can take some time, depending on the amount of clogging. The time can range anywhere from 12 to 24 hours.

Once it is done, take the bag off carefully, and dump the vinegar. You can also add some cleaning soda when you throw the vinegar down the drain. It will clean out your pipe on the go. Turn on the shower and keep it on for a few minutes to get rid of any residual vinegar. Voila! The shower is back to its full speed.

If the staining issue is particularly stubborn in your case, you can soak it even longer in vinegar to wash it away. You can alternatively use some baking soda on a brush to clean the small nozzles to remove discoloration. After rinsing, you will see an improvement.

Using Baking Soda to Get Rid Of A Clogged Shower head

For our second method, we will use baking soda instead of white vinegar. The steps here are also pretty straight forward.  All you need is a brush, a bowl, and some baking soda.

ARM & HAMMER Pure Baking Soda 8 oz
  • America's #1 trusted Baking Soda brand
  • Versatile, effective and affordable
  • Use for baking, cleaning, deodorizing and more

Since the materials are all organic, there are no harmful side effects of this process. After vinegar, this is the most popular method to clean a clogged shower head.

Take a sponge and scrub the shower head to get rid of any debris. You want to apply the baking soda directly on the shower, and that is why you want the surface as clean as possible.

Then take the bowl and fill it with a mixture of baking soda and warm water. The mix of the two materials will form a paste. Apply the paste using a brush directly on the shower head.

You can also use your hand, but it is not recommended since long term exposure to baking soda on your skin can cause some damage. If you have to use your hands, make sure to wear protective gloves.

After application, wait a maximum of 15 minutes. If you wait too long, the baking soda will get tougher, and it will be hard for you to wash off. After 15 minutes, scrub off the paste using a brush. The rust should come off easily, and then you can turn on the water to get rid of any residual baking soda.

You will be surprised to see the look of your fresh and new-looking shower head. In just a few short steps, you will get rid of any accumulating stains. This process is easy, and the materials are always available at hand.

Tips to Prevent Further Clogging

A clogged shower head is an annoying thing to face, but there are ways to avoid it. First and most importantly, try to keep your bathroom clean and well-ventilated to prevent any moisture build-up.

Prevent Further Clogging

When scrubbing the washroom, also scrub the shower head properly. Most people skip this and regret it when the shower head clogs up. Also, another neat little trick involves tilting the shower head at an angle.

Face it completely downwards so that the head points directly to the floor. Now when you are done with the shower and turn it off, the water drains completely. You do not have to worry about residual minerals in the water, clogging it up. Although this is not a 100 percent fix, it helps.


The shower is the one time in our day where we can relax and escape from all the hassles of life. So, you want it to go as smooth as possible. If you turn on your shower and feel only a trickle of water dropping on your shoulder, imagine how you would feel.

That is why it is important to keep your shower head clean and to flow properly. Think of it this way, if your shower-head is not clean itself, how can you expect it to clean you? Using the two methods mentioned above, you should be able to get rid of the clog without having to call the plumbers. Good luck!

Also read:

Rate this post